Hacking Dop-IOS Mod 9

[bnm81002]

I am updating all of my IOS's to the latest versions using Dop-IOS Mod 9 but I have no idea what is Apply Sig Hash Check patch in IOS..? what is it? do I need to apply it in my IOS? thanks

 

[Helsionium]

If you don't know what it is, then don't do it. You probably don't need it, you'd know otherwise.

 

[D-an-W]

Can't answer yout question, but was going to ask if it is a good idea to update older IOS's to the latest ones?

 

[longtom1]

Apply Sig Hash Check patch in IOS = Trucha bug

 

[Helsionium]

Can't answer yout question, but was going to ask if it is a good idea to update older IOS's to the latest ones?

Of course. There's nothing bad about it. I'm not sure what's the benefit of updating the IOSes, but it certainly can't harm. Dop-IOS only downloads and installs sane IOS versions, it won't download stubbed versions.

 

[D-an-W]

sane and stubbed? Damn...I need to keep up!

 

[tj_cool]

I don't think the new dop-ios allows you to install stubs
but better be careful anyway!

 

[xzxero]

i dont think any dop-ios lets you install stubbed IOS's

 

[techboy]

It doesn't last I checked. I know v8 doesn't let you.

 

[bnm81002]

thanks for the help here, I updated all of my IOS's with Apply Sig Hash Check patch in IOS.. included as well, but it didn't solve my Wad Manager problem at all, here's the problem,

Press LEFT/RIGHT to change IOS version.

Press A button to continue.
Press HOME button to restart.



it won't let me change the IOS version and any button I press, the same message appears again and again, please help me fix the problem

 

[techboy]

Get a new copy of Wad Manager. It may be corrupt. I've never seen someone have that issue before.

 

[bnm81002]

Get a new copy of Wad Manager. It may be corrupt. I've never seen someone have that issue before.

I tried WM 1.3, 1.4, 1.5, 1.5 MOD(wiiNinja version) and this version but it all had that same problem

 

[xzxero]

what about the gui version?

 

[pepxl]

Get a new copy of Wad Manager. It may be corrupt. I've never seen someone have that issue before.


I tried WM 1.3, 1.4, 1.5, 1.5 MOD(wiiNinja version) and this version but it all had that same problem

quick test

get a new/empty SD card, format it in windows to FAT32 but not a quick format and do the following so only the app and a wad is on it

i recommend wadman 1.5 multimod by leathl for testing

1. add the wad folder to the root of the SD - sd:/wad/
2. add an apps folder to the root of the SD - sd:/apps/
3. add a wadmanager folder to the apps folder - sd:/apps/wadmanager/
4. plca the boot.dol in the wadmanager folder - sd:/apps/wadmanager/boot.dol
5. open a new .txt file and add the following

Spoiler

QUOTE

Spoiler

; wm_config.txt resides in sd:/wad, and it is optional. You will get all the prompts if you don't have this file.
; The param keywords are case-sensitive at this point.
; No spaces precede the keyword on a line
; If you don't have a password in the config file, the default is no password
; If you don't have a startupPath, the default is /wad
; If you don't have any of the other parameters, it will prompt you for it
; To bypass any of the params, just comment out the line using a ";" at the beginning of the line
; Blank lines are ignored.
;
; Password=your_password (LRUD only, where L=left, R=right, U=up, D=down on the WiiMote or GC ;Controller, max 10 characters)
; StartupPath=startupPath (starting at the root dir "/"). Be sure that the path exists, else you will get an error.
;
;Password=
StartupPath=/WAD

; Example of StartupPath at the root of the SD card
StartupPath=/WAD

; cIOS: 249, 222, whatever
cIOSVersion=249

; FatDevice: sd usb usb2 gcsda gcsdb
FatDevice=sd

; NANDDevice: Disable SD USB
; Note that WM will prompt for NAND device only if you selected cIOS=249
NANDDevice=Disable

6. save the .txt as wm_config.txt and place that in the sd:/wad? folder
7. get a know working wad file and place it in the wad folder
8. pop the SD in the wii load it thru HBC
9. install the wad

once youve done those stepps or have tried, post you results

 

[bnm81002]

Get a new copy of Wad Manager. It may be corrupt. I've never seen someone have that issue before.


I tried WM 1.3, 1.4, 1.5, 1.5 MOD(wiiNinja version) and this version but it all had that same problem

quick test

get a new/empty SD card, format it in windows to FAT32 but not a quick format and do the following so only the app and a wad is on it

i recommend wadman 1.5 multimod by leathl for testing

1. add the wad folder to the root of the SD - sd:/wad/
2. add an apps folder to the root of the SD - sd:/apps/
3. add a wadmanager folder to the apps folder - sd:/apps/wadmanager/
4. plca the boot.dol in the wadmanager folder - sd:/apps/wadmanager/boot.dol
5. open a new .txt file and add the following

Spoiler

QUOTE

Spoiler

; wm_config.txt resides in sd:/wad, and it is optional. You will get all the prompts if you don't have this file.
; The param keywords are case-sensitive at this point.
; No spaces precede the keyword on a line
; If you don't have a password in the config file, the default is no password
; If you don't have a startupPath, the default is /wad
; If you don't have any of the other parameters, it will prompt you for it
; To bypass any of the params, just comment out the line using a ";" at the beginning of the line
; Blank lines are ignored.
;
; Password=your_password (LRUD only, where L=left, R=right, U=up, D=down on the WiiMote or GC ;Controller, max 10 characters)
; StartupPath=startupPath (starting at the root dir "/"). Be sure that the path exists, else you will get an error.
;
;Password=
StartupPath=/WAD

; Example of StartupPath at the root of the SD card
StartupPath=/WAD

; cIOS: 249, 222, whatever
cIOSVersion=249

; FatDevice: sd usb usb2 gcsda gcsdb
FatDevice=sd

; NANDDevice: Disable SD USB
; Note that WM will prompt for NAND device only if you selected cIOS=249
NANDDevice=Disable

6. save the .txt as wm_config.txt and place that in the sd:/wad? folder
7. get a know working wad file and place it in the wad folder
8. pop the SD in the wii load it thru HBC
9. install the wad

once youve done those stepps or have tried, post you results

nope still has that problem

 

[Hatsu]

There's a Dop-IOS v9?? I still run v8.