Hi all, I’m trying to install a new picofly RP2040 into my oled switch as the one that was originally installed by someone else ended up failing however when booting the switch I get blue Long green short green indicating a DAT0 error however my DAT0 solder adapter reads in the range of .500~.850 (I think it’s .753 if I remember correctly) still getting this error though any suggestions?
OLED getting D0 error but I have correct diode voltage
- Thread starter HunterCustom
- Start date
- Views 844
- Replies 10
what resistors did you use on the picofly? A lot of people had to double up the 47ohm, or use a 100ohm, on both dat0 and CMD. Then again, if you just went and did that first, then maybe you want to try the 47ohm route...
I don’t have any that im aware of im just using what was included I have one of those PCB ones but I’ll look into grabbing the 47ohm resistor see if that helps
yea, the exact model is needed. If you bought an instinct v6s, for instance, that is NOT a picofly, and doesn't require resistors. If it IS a picofly, did you read through the .pdf picofly install guide from this page?
Hey guys sorry, Naming threw me off. I have an instinct v6 clone version such as this image
this is my DAT0 connector, and I still get the long short error
Here is a clip of the error code (incase Im reading it wrong as i've done before)
update before i go to bed can confirm diode of .516, tried soldering direct to chip no long same error considering order nonclone chip to try
Post automatically merged:
this is my DAT0 connector, and I still get the long short error
Post automatically merged:
Here is a clip of the error code (incase Im reading it wrong as i've done before)
Post automatically merged:
update before i go to bed can confirm diode of .516, tried soldering direct to chip no long same error considering order nonclone chip to try
Last edited by HunterCustom,
It's likely not a resistor issue with that chip, but I have no experience with that chip. Does it accept firmware from https://github.com/Ansem-SoD/Picofly/tree/main/Firmwares ? It's not something that's listed in the readme, but I'm going to jump the gun and assume that there's no way a real instinct chip firmware is going to work right on that thing. Your DAT0 looks as solid as it can be.
Did it come with firmware update instructions? Where do you download the firmware from?
EDIT: WAtch this video starting around 16:30, then see if maybe you have the same issue with grounding:
Did it come with firmware update instructions? Where do you download the firmware from?
EDIT: WAtch this video starting around 16:30, then see if maybe you have the same issue with grounding:
Last edited by urherenow,
I’ve had luck with these on the v1/2 and LITEs but never the oled and I’ve always used the firmware from your provided link. I’ll definitely check out the video you included though see if that would help. But I did end up ordering an instinct off Ali Express last night might as well throw a real one onto at this point.
Thank you for your help with this issue
I was wondering if you have any updates with the Instinct installed. I have the same exact problem although it does work occasionally but sometimes fails. I can't order the instincts directly to Germany so i'd have to use an expensive reship service to geth them here. I'd get 5-10 chips st once to make it worth the cost, but i'd need to know if these fixed your problem.
When it doesn't glitch i get the dat0 error. The ribbon cant move a bit, it's a new v6 one and i have resoldered again today, hope that improves it. And i hope we can soon get instincts in Germany, the 50% premium over the picoflys are well worth it imo of they work better. I am using a cheap knockoff picofly btw.
Similar threads
-
BigOnYa
-
Psionic Roshambo
-
BakerMan
I rather enjoy a life of taking it easy. I haven't reached that life yet though.
-
-
@
BigOnYa:
I think the tv series has boasted play of, I did see they said playing of it Is up, way more than norm+1
-
-
-
-
-
@
BigOnYa:
At least you have some fast speeds. What a drag that used to be, I remb downloading 1 pic back in the day, and seeing line by line show+1
-
-
@
BigOnYa:
Or worse, you downloading something, and someone calls your phone and interupts the download, good ole AOL. Of course that's before most you guys even were born yet.
-
@
Psionic Roshambo:
Lol I think my first modem was 48K but it had some sort of firmware or software update that let me get 56K+1
-
-
-
-
-
@
Psionic Roshambo:
I legit think they passed the cyber terrorism laws from some of my hmm pranks lol
-
@
Psionic Roshambo:
I knocked the east coast backbone of EarthLink offline for like 6 hours one time, was on the news and everything well I mean I wasn't on the news.... Just they where having "technical difficulties" lol+1
-
@
Psionic Roshambo:
Was just one single custom packet. I miss when Internet security was an afterthought lol almost all modems and network hardware operated in promiscuous mode.
-
@
Psionic Roshambo:
Now these days they do sanity checks.... The source IP can't also be the destination IP lol
-
-
@
BakerMan:
GUYS I JUST COMMENTED A YOUR MOM JOKE ON A GACHA YT COMMUNITY POST (the algorithm has cursed me in terms of community posts, bc I fuck around on that sort of community post, just commenting and being a jackass)+1
-
-
@
BakerMan:
the OP made a couple vocaloid characters, and the post had the caption "Guess who I did+1
hint: they're from vocaloid" -
-
@
Psionic Roshambo:
I studied IPV6 if they hadn't passed the cyber terrorism laws omg.... In theory I have some awesome pranks but I'm afraid to test them lol
-
