Hello,
Without cause or reason (I didn't open it), one day my New 3DS started holding in the ZR Button constantly. It's not an on/off thing, there's never been a time since when the ZR Button has not been held in.
So, I opened it up for the first time and tried plugging it in the cable that connects the ZR button backwards (hoping I might be able to use my home menu as it just scrolls constantly to the right) however after plugging it in backwards BOTH the ZR and R button get held in constantly, so I put it back.
Recently, I ordered a new ZR button and a new ZR and R button flex cable which connects to the board. (Pictured below)
However, after replacing the ZR Button and ZR Flex cable, taking out the old one and putting it back together, the ZR Button is still being held in constantly.
However, after doing this, I noticed that also (occasionally) the Select button would be newly held in after replacing the ZR Flex cable with the new one. As well as this, I've observed that with the new flex cable inserted, when charging the system, the Orange charge light would somewhat flicker very subtly or strobe slightly while charging.
Does anyone know what part of the boards inside could be causing this?
Without cause or reason (I didn't open it), one day my New 3DS started holding in the ZR Button constantly. It's not an on/off thing, there's never been a time since when the ZR Button has not been held in.
So, I opened it up for the first time and tried plugging it in the cable that connects the ZR button backwards (hoping I might be able to use my home menu as it just scrolls constantly to the right) however after plugging it in backwards BOTH the ZR and R button get held in constantly, so I put it back.
Recently, I ordered a new ZR button and a new ZR and R button flex cable which connects to the board. (Pictured below)
However, after replacing the ZR Button and ZR Flex cable, taking out the old one and putting it back together, the ZR Button is still being held in constantly.
However, after doing this, I noticed that also (occasionally) the Select button would be newly held in after replacing the ZR Flex cable with the new one. As well as this, I've observed that with the new flex cable inserted, when charging the system, the Orange charge light would somewhat flicker very subtly or strobe slightly while charging.
Does anyone know what part of the boards inside could be causing this?