2ds Turning on with black screen (there is the light as it's on tho) [Have CFW]

[CoolMe]

by here what do you mean?

??

also the test didn't identify any errors.

You formatted the sd card as Fat32 32kb before and after the test, right?
You did the test with the read & write setting, right?

 

[M4nuelig0]

??

You formatted the sd card as Fat32 32kb before and after the test, right?
You did the test with the read & write setting, right?

yes
now i am moving the files back in the sd card i'll let you know once i have them back what happens

 

[CoolMe]

yes
now i am moving the files back in the sd card i'll let you know once i have them back what happens

Format it as FAT32 32kb clusters after the test, then start copying your data to it. Insert the sd card back into the system, and see if it behaves the same as it did before.
Also, see if you can boot into the recovery mode with the button combo "A+R+L+Up(DPad)".

 

[M4nuelig0]

Format it as FAT32 32kb clusters after the test, then start copying your data to it. Insert the sd card back into the system, and see if it behaves the same as it did before.
Also, see if you can boot into the recovery mode with the button combo "A+R+L+Up(DPad)".

oh my god it's back up and working, thank you so much you saved my life

 

[CoolMe]

oh my god it's back up and working, thank you so much you saved my life

What? Did the system boot into the home menu? Or to the recovery mode?

 

[M4nuelig0]

What? Did the system boot into the home menu? Or to the recovery mode?

it booted in the home menu, now it's working like before this problem happened

 

[CoolMe]

it booted in the home menu, now it's working like before this problem happened

Weird, 'cause all i suggested is testing & reformatting the sd card.. I would highly recommend backing up all your saves with Checkpoint just in case.
Also, you have to set up ctrnand Luma3DS, so it'd boot into the home menu if you don't have the sd card inserted. You can do this easily just by updating Luma3DS in Universal-Updater. Reboot the system after doing it.

 

[JackTheFroster]

it was most likely a software issue, since the luma menu while holding start on boot was showing up. i had plenty hardware issues while repairing 2 3ds systems from a friend and there is no way it would have showed up anything unless luma could override the hardware checks if something isnt connected properly. honestly those systems weren't modded, so i cant really tell, but i'm pretty sure. maybe other models have differences for example if the camera is unplugged i believe only old 3ds systems refuse to boot and new 3ds ones dont. idk, i would always guess its something software related (or at least sd card related) if luma menu on boot is somehow showing up

 

[alivingpeanut]

dont mind me, just trying to figure out how to delete this

 

[superdumbbros]

I do have the problem with the popping sound effect, I'd like to know how to fix it also sometimes it turns on

 

[lone_wolf323]

I do have the problem with the popping sound effect, I'd like to know how to fix it also sometimes it turns on

any drops of the console or any modding of the insides of the console done to it?

 

[alivingpeanut]

I do have the problem with the popping sound effect, I'd like to know how to fix it also sometimes it turns on

sounds like you have a slightly misaligned ribbon cable, probably a display one. Your best bet is reseating the display cables, if that doesn't work clean and reseat all of them

 

[djdjsj]

by here what do you mean? sorry if i wasn't responding but i went to sleep also the test didn't identify any errors.

I know it's late but, you press l+r trigger,up on dpad and a, hold as you power on keep holding, it will say update, press cancel and keep doing it until it launches