Hi guys,
I have a Wii Mini that I have hard and soft modded to restore all functionality using these kits -
https://www.tindie.com/products/webhdx/wifi-kit-for-wii-mini/
https://www.tindie.com/products/webhdx/wiimini-sdrst-sd-reset-button-mod-for-wii-mini/
https://www.tindie.com/products/devnol/minirgbii-wii-mini-component480p-video-add-on/
I followed the guides referenced in each listing description and this -
https://wii-mini-hacking.github.io/Pimp-My-mini/
As I understand the end result is that I'm effectively using a standard Wii system and system menu at this point with 480p video on.
For storage I have a 128gb SD card and a 4tb nvme ssd enclosure (which I used linux to change the sector size on to 4k to enable >2TB Fat32 partition)
Both are MBR and have one Fat32 primary partition
Everything has been running perfectly and I've been enjoying a few games and a lot of the homebrew emulators, the only issue I've run into is EmuNand.
ALL WiiWare on EmuNand are recognized and show fine in usb loader gx but they all boot to a black screen.
Using UD neek2o does not help and also boots to a black screen.
I also can not boot directly into the neek sys menu through usb loader gx (you guessed it: black screen).
Notably after trying to boot with UD neek2o my sneek folder, usb1:/sneek, has a new file created each time - "nandcfg.bin" so USB access seems to be working fine.
Installing the same exact WiiWare wads to my system nand works perfectly
And even loading them off of my SD card after moving them through official system memory management works fine.
For the EmuNand I have tried dumping it through usb loader gx and I've tried building one using ModMii both with and without PriiLoader installed.
While trying to load a game through EmuNand I can see the activity light on my ssd enclosure stay light and blink for a short bit every once in a while.
When creating the EmuNand through ModMii I currently said No to basically everything similar to this -
https://rwiihacks.com/tutorials/emunand/index.html
Currently I'm using -
USB Loader GX Version 3.0 r1281
PriiLoader IOS v80 SystemMenu v513 Priiloader v0.10.0 (r0x02b70b36)
ModMii SysCheck
I've been reading through a lot of Cyan's guides trying to troubleshoot and get this to work.
https://gbatemp.net/threads/driver-san-francisco-hangs-on-load-screen.389252/post-5508831
https://gbatemp.net/threads/how-do-...-properly-utilize-emunand.437521/post-6592730
https://gbatemp.net/threads/neek2o-stuck-on-reloading-bootmii-ios.533979/post-8562378
I also tried these fixes in a post from blackb0x -
https://gbatemp.net/threads/wiiware...and-emunand-black-screen.629016/post-10144130
And I've read through the Troubleshooting Guide -
https://gbatemp.net/threads/usb-loader-gx-troubleshooting-guide.617564/
I can only think of three more things to try -
1) Track down whichever old version of Uneek that still had support for PriiLoader, install that version instead, then try dumping my own nand to emunand again with usb loader gx
2) Uninstall Priiloader, dump my nand to emunand through usb loader gx, and then reinstall Priiloader
3) Try sneek instead?...??
Does anyone have any other ideas or see anything wrong?
Also Does anyone know know which version of neek still supported priiloader?
Any help would be appreciated, been working on modding and setting up this wii for like over a month or so now and I feel like I'm so close to having it perfect!
I have a Wii Mini that I have hard and soft modded to restore all functionality using these kits -
https://www.tindie.com/products/webhdx/wifi-kit-for-wii-mini/
https://www.tindie.com/products/webhdx/wiimini-sdrst-sd-reset-button-mod-for-wii-mini/
https://www.tindie.com/products/devnol/minirgbii-wii-mini-component480p-video-add-on/
I followed the guides referenced in each listing description and this -
https://wii-mini-hacking.github.io/Pimp-My-mini/
As I understand the end result is that I'm effectively using a standard Wii system and system menu at this point with 480p video on.
For storage I have a 128gb SD card and a 4tb nvme ssd enclosure (which I used linux to change the sector size on to 4k to enable >2TB Fat32 partition)
Both are MBR and have one Fat32 primary partition
Everything has been running perfectly and I've been enjoying a few games and a lot of the homebrew emulators, the only issue I've run into is EmuNand.
ALL WiiWare on EmuNand are recognized and show fine in usb loader gx but they all boot to a black screen.
Using UD neek2o does not help and also boots to a black screen.
I also can not boot directly into the neek sys menu through usb loader gx (you guessed it: black screen).
Notably after trying to boot with UD neek2o my sneek folder, usb1:/sneek, has a new file created each time - "nandcfg.bin" so USB access seems to be working fine.
Installing the same exact WiiWare wads to my system nand works perfectly
And even loading them off of my SD card after moving them through official system memory management works fine.
For the EmuNand I have tried dumping it through usb loader gx and I've tried building one using ModMii both with and without PriiLoader installed.
While trying to load a game through EmuNand I can see the activity light on my ssd enclosure stay light and blink for a short bit every once in a while.
When creating the EmuNand through ModMii I currently said No to basically everything similar to this -
https://rwiihacks.com/tutorials/emunand/index.html
Currently I'm using -
USB Loader GX Version 3.0 r1281
PriiLoader IOS v80 SystemMenu v513 Priiloader v0.10.0 (r0x02b70b36)
ModMii SysCheck
SysCheck ME v2.5.0 by blackb0x, JoostinOnline, Double_A, R2-D2199 and Nano
...runs on IOS58 (rev 6176).
Region: NTSC-U
System Menu 4.3U (v513)
Priiloader installed
Drive date: 06.29.2012
Homebrew Channel 1.1.2 running on IOS58
Console ID: 20228****
Console Type: Wii
Shop Channel Country: United States (49)
Boot2 v4
Found 64 titles.
Found 50 IOS on this console. 15 of them are stubs.
IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 1034): No Patches
IOS10 (rev 768): Stub
IOS11 (rev 256): Stub
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 512): Stub
IOS17 (rev 1032): No Patches
IOS20 (rev 256): Stub
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 2816): Stub
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 3608): No Patches
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 5120): Stub
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS59 (rev 9249): No Patches
IOS60 (rev 6400): Stub
IOS61 (rev 5662): No Patches
IOS62 (rev 6430): No Patches
IOS70 (rev 6912): Stub
IOS80 (rev 6944): No Patches
IOS222 (rev 65280): Stub
IOS223 (rev 65280): Stub
IOS248[38] (rev 65535, Info: d2x-v11beta1): Trucha Bug, ES Identify, NAND Access
IOS249[56] (rev 65535, Info: d2x-v11beta1): Trucha Bug, NAND Access, USB 2.0
IOS250[57] (rev 65535, Info: d2x-v11beta1): Trucha Bug, NAND Access, USB 2.0
IOS251[58] (rev 65535, Info: d2x-v11beta1): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v10
Report generated on 11/14/2023.
I've been reading through a lot of Cyan's guides trying to troubleshoot and get this to work.
https://gbatemp.net/threads/driver-san-francisco-hangs-on-load-screen.389252/post-5508831
https://gbatemp.net/threads/how-do-...-properly-utilize-emunand.437521/post-6592730
https://gbatemp.net/threads/neek2o-stuck-on-reloading-bootmii-ios.533979/post-8562378
I also tried these fixes in a post from blackb0x -
https://gbatemp.net/threads/wiiware...and-emunand-black-screen.629016/post-10144130
And I've read through the Troubleshooting Guide -
https://gbatemp.net/threads/usb-loader-gx-troubleshooting-guide.617564/
I can only think of three more things to try -
1) Track down whichever old version of Uneek that still had support for PriiLoader, install that version instead, then try dumping my own nand to emunand again with usb loader gx
2) Uninstall Priiloader, dump my nand to emunand through usb loader gx, and then reinstall Priiloader
3) Try sneek instead?...??
Does anyone have any other ideas or see anything wrong?
Also Does anyone know know which version of neek still supported priiloader?
Any help would be appreciated, been working on modding and setting up this wii for like over a month or so now and I feel like I'm so close to having it perfect!
Last edited by TiredKorok,